Netgear RBS40V-200 User Manual - Page 6

Orbi Voice 6. Sync button (also used for WPS connection). Use the sync button to sync your Orbi Voice to your Orbi router or to connect WPS-enabled devices to your Orbi Voice. 7. Ethernet ports. Connect Ethernet devices to the Ethernet ports. 8. Power On/Off button and Power LED. Press the Power On/Off button to turn your Orbi Voice on or off. The Power LED is located above the Power On/Off button. 9. Power connector. Connect the power adapter to the Power connector. 10. Reset button. To factory reset your Orbi Voice, press the Reset button until the Power LED blinks amber. Power LED The Power LED is located above the Power On/Off button on the rear panel. The following is the LED behavior for the Power LED: • Solid green. Power is on. • Solid amber. The Orbi Voice is booting. • Blinking amber. The Orbi Voice is resetting to factory default settings. • Blinking red. The firmware is corrupted. • Off. Power is not supplied. Ring LED When your Orbi Voice syncs with your Orbi router, it lights the following colors: Table 1. Ring LED behavior during syncing LED Color Pulsing white Solid white Solid blue LED Behavior The Orbi Voice is booting, or your Orbi Voice is attempting to sync with your Orbi router. The Orbi Voice is ready to sync with your Orbi router. Your Orbi Voice and Orbi router successfully synced, and the connection between your Orbi Voice and router is good. The ring LED lights solid blue for about three minutes and then turns off. Overview 6 User Manual