Netgear RND4275 Hardware Manual - Page 14

ReadyNAS Duo and NV+ Status Information You can obtain information about the status of your system by reviewing the indicators listed in the following table. Indicator Power button and LED Disk LEDs (1, 2) Disk Activity LED Rear panel Ethernet port LEDs Description Press this button to turn on the ReadyNAS. The LED has these states: • Blinking. Booting or shutting down • On. Powered on • Off. Powered off Each disk bay has an LED associated with it on the front panel of the system. The Disk LEDs have these states: • On. Power is on, and the disk is operating normally. • Blinking. The disk was removed, failed, or is resynchronizing. • Off. The disk bay is empty. The Disk Activity LED has these states: • Blinking. A disk is active. • Off. No disks are active. Two LED status indicators are built into this port, one green and one amber. They indicate port speed and activity as follows: • Green on, amber off. 1000 Mbps connection speed, no activity • Green blinking, amber off. 1000 Mbps connection speed, activity • Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity • Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, no activity • Green off, amber off. No connection System Shutdown You can shut down your system in these ways: • To shut down the system gracefully, press and hold the Power button until the Power button LED flashes (about 5 seconds). • To force the system to shut down when it is not responding, unplug it. • To shut down your system from your computer, use FrontView. For more information, see the ReadyNAS RAIDiator 4.1 Software Manual, which is available at http://www.readynas.com/documentation. ReadyNAS Duo 14