Netgear WAG102 WAG102 Reference Manual - Page 50
NETGEAR_11g, Authentication, WEP Encryption Keys, WPA-PSK Preshared Key, WPA RADIUS Settings.
UPC - 606449028799
View all Netgear WAG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g) 802.11b/g Configuration For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR_11g is the default WAG102 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID: • Authentication Circle one: Open System or Shared Key. Choose Shared Key for more security. Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key as well and have the same keys in the same positions as those in the WAG102. • WEP Encryption Keys Circle one: 64, 128, or 152 bits. (Enter all four 802.11b/g keys for the Key Size chosen.) Key 1 Key 2 Key 3 Key 4 WPA-PSK (Preshared Key) Record the WPA-PSK key. Key WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret Use the procedures described in the following sections to configure the WAG102. Store this information in a safe place. 2-24 Basic Installation and Configuration v2.0, September 2006