Netgear WG102 WG102 Reference Manual - Page 44

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual Table 3-1. General Information Fields Field Access Point Information Access Point Name (NetBIOS name) Country/Region Firmware Version Access Point Mode VLAN (802.1Q) Management VLAN ID Current IP Settings IP Address Subnet Mask Default Gateway DHCP Client MAC Address Current Wireless Settings Channel/Frequency Security Profiles Description The default name may be changed if desired. The domain or region for which the wireless access point is licensed for use. It may not be legal to operate this wireless access point in a region other than one of those identified in this field. The version of the firmware currently installed. The operating mode of the WG102: Access Point, Point-to-point bridge, Multi-point bridge or Repeater. Indicates if VLAN support is enabled. The default is disabled. Displays the VLAN ID. The IP address of the wireless access point. The subnet mask for the wireless access point. The default gateway for the wireless access point communication. If this is enabled, the current IP address was obtained from a DHCP server on your network. Disabled indicates a static IP configuration. The Media Access Control address (MAC address) of the wireless access point's Ethernet port. The channel the wireless port uses. The default channel setting is automatic channel selection. For the frequencies used on each channel, see the link to the online document "Wireless Communications" in Appendix B." For each Security Profile, the following are displayed: Profile name, SSID, security option, VLAN ID, and enabled/disabled. 3-2 Management v1.0, July 2008