Netgear WG302 WG302v2 Reference Manual - Page 21
Hardware Description, Front Panel - 802 11g
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual Hardware Description This section describes the WG302v2 front and rear hardware functions. Front Panel Figure 0-1 Viewed from left to right, the WG302v2 has these status LEDs: PWR, TEST, LAN, and 802.11g WLAN. LED Description PWR TEST LAN Power Indicator Off No power. If this LED does not come on with the power adapter and cord correctly installed, see Chapter 5, "Troubleshooting. On Power is on. Self Test Indicator Blink Indicates self test, loading software, or system fault (if continues). Note: This LED may blink for a minute before going off. Ethernet link indicator Off No connection detected on the Ethernet link Amber On 10 Mbps Ethernet link detected Amber Blink Data is being transmitted or received on the 10 Mbps Ethernet link Green On 100 Mbps Fast Ethernet link detected. Green Blink Data is being transmitted or received on the 100 Mbps Ethernet link Introduction 1-5 v1.0, May 2006