Netgear WG302v1 Application Notes - Point to Point Bridging
Netgear WG302v1 - ProSafe 802.11g Wireless Access Point Manual
 |
View all Netgear WG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear WG302v1 manual content summary:
- Netgear WG302v1 | Application Notes - Point to Point Bridging - Page 1
WG302 - Point-to-Point Bridging: Use and Configuration CONFIGURATION - How to set up the access points: The layout for this example will use WG302v2 access points. All the devices must use the exact same settings, with the exception of their IP address; same SSID, same channel, same encryption, etc. - Netgear WG302v1 | Application Notes - Point to Point Bridging - Page 2
this particular access point). In the 'Remote MAC Address' field insert the MAC address of the FIRST unit. TESTING - Verifying the connection: To verify this connection, try connecting wirelessly to the main unit and using the 'ping' DOS command to the IP address of the other access points. If the
-
1 -
2
 |
 |
WG302
–
Point-to-Point Bridging: Use and Configuration
CONFIGURATION
–
How to set up the access points:
The layout for this example will use WG302v2 access points.
All the devices must use the exact same settings,
with the exception of their IP address
; same
SSID, same channel, same encryption, etc.
CONFIGURATION
–
First unit
:
Once this access point has its basic configuration set and you’ve confirmed it to be working
properly, go to the ‘Access Point Settings’ section and enable wireless bridging
and repeating,
select ‘Wireless Point to
Point
Bridge’ and enable Wireless Client Association (If you want
stations to be able to connect to this particular access point)