Netgear WG311v2 WG311v2 User Manual

Netgear WG311v2 - 54 Mbps Wireless PCI Adapter Manual

Get Netgear WG311v2 - 54 Mbps Wireless PCI Adapter PDF manuals and user guides View all Netgear WG311v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear WG311v2 manual content summary:

  • Netgear WG311v2 | WG311v2 User Manual - Page 1
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Version v1.1 December 2003
  • Netgear WG311v2 | WG311v2 User Manual - Page 2
    software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card. E-mail: [email protected] Web site: www.netgear that the Model WG311 Wireless PCI Adapter has been in the operating instructions. Federal Office
  • Netgear WG311v2 | WG311v2 User Manual - Page 3
    of radio interference. Read instructions for correct handling. FCC Information to User This product does not contain any user serviceable components and is to be operation. FCC Radio Frequency Interference Statement NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Tested to Comply with FCC Standards FOR
  • Netgear WG311v2 | WG311v2 User Manual - Page 4
    the receiver is connected • Consult the dealer or an experienced radio/TV technician for help Export Restrictions This product or software contains encryption ); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements ETSI EN 301 489-17
  • Netgear WG311v2 | WG311v2 User Manual - Page 5
    Regulations This digital apparatus (Model WG311 v2 Wireless PCI Adapter) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Canada ID: 4054A-WG311V2 v December 2003
  • Netgear WG311v2 | WG311v2 User Manual - Page 6
    vi December 2003
  • Netgear WG311v2 | WG311v2 User Manual - Page 7
    Default Wireless Configuration Settings 2-3 Basic Installation Instructions 2-4 For Windows XP Users Installing a WG311 v2 2-4 For Windows 2000 & 98/Me Users Installing a WG311 v2 2-8 WG311 v2 Wireless Connection Indicators 2-12 Interpreting System Tray Icon Colors 2-12 Basic Troubleshooting
  • Netgear WG311v2 | WG311v2 User Manual - Page 8
    to Configure WEP Encryption Security 3-10 Statistics Page ...3-12 Advanced Settings Page 3-13 Appendix A Technical Specifications Appendix B Wireless Networking Basics Wireless Networking Overview B-1 Infrastructure Mode B-1 Ad-Hoc Mode (Peer-to-Peer Workgroup B-2 Network Name: Extended Service
  • Netgear WG311v2 | WG311v2 User Manual - Page 9
    Glossary List of Glossary Terms D-1 Index Contents ix
  • Netgear WG311v2 | WG311v2 User Manual - Page 10
    x Contents
  • Netgear WG311v2 | WG311v2 User Manual - Page 11
    WG311 v2 works with Windows 98, Me, 2000, and XP operating systems. Key Features and Related NETGEAR Products The WG311 v2 Wireless PCI Adapter provides the following features: • Reliable IEEE 802.11b standards-based wireless technology. • Supports roaming between access points when configured in
  • Netgear WG311v2 | WG311v2 User Manual - Page 12
    Adapter WG311 v2 • Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 • NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Resource CD, including: - Configuration Utility Software - Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 • Warranty card • Support
  • Netgear WG311v2 | WG311v2 User Manual - Page 13
    the range of 802.11b/g wireless networks, please see "Observe Location and Range Guidelines" on page 2-2. To learn about wireless networking technology, see Appendix B, "Wireless Networking Basics" for a general introduction. NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 with the settings
  • Netgear WG311v2 | WG311v2 User Manual - Page 14
    PC Networking Tutorial on software installed and the NETGEAR 54 Mbps configured on my PC Wireless PCI Adapter WG311 v2 according to the requirements Resource CD and the Help of the Internet service provider information provided in the 4. A browser like Internet Windows system you are using
  • Netgear WG311v2 | WG311v2 User Manual - Page 15
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Table 1-1. A Road Map for How to Get There From Here If I Want To? What Do I Do? What's Needed? How Do I? Exchange files 1. Use the 1. The desktop computer I am between a Windows using to connect to the wirelessly
  • Netgear WG311v2 | WG311v2 User Manual - Page 16
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Table 1-1. A Road Map for How to Get There From Here If I Want To? What Do I Do? What's Needed? How Do I? Use printers in 1. Use the 1. The desktop computer I am Windows Domain settings are a combined Windows using to connect
  • Netgear WG311v2 | WG311v2 User Manual - Page 17
    your NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 and set up basic wireless connectivity on your Wireless Local Area Network (WLAN). Advanced wireless network configuration is covered in Chapter 3, "Configuration" in this manual. Note: Indoors, computers can easily connect to 802.11 wireless
  • Netgear WG311v2 | WG311v2 User Manual - Page 18
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Observe Location and Range Guidelines Computers can connect over 802.11g wireless networks indoors at a range which varies significantly based on the physical location of the computer with the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2
  • Netgear WG311v2 | WG311v2 User Manual - Page 19
    be configured with the same wireless network name (SSID). • Network Mode (Infrastructure or Ad-Hoc): Infrastructure • Data security WEP encryption: Disabled The section below provides instructions for setting up the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 for basic wireless connectivity to
  • Netgear WG311v2 | WG311v2 User Manual - Page 20
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Basic Installation Instructions Use the procedure below that corresponds to the version of Windows you are using. For Windows XP Users Installing a WG311 v2 Install the WG311 v2 software. a. Power on your computer, let the
  • Netgear WG311v2 | WG311v2 User Manual - Page 21
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Install the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2. a. Shut down the PC and remove the power cord. Hold the PCI Adapter with the NETGEAR logo facing up and insert it into an available PCI slot. Connect the antenna to the adapter
  • Netgear WG311v2 | WG311v2 User Manual - Page 22
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Configure your WG311 v2. a. Right-click on the network icon in the Windows XP system tray to open the network options menu. b. Click on the View Available Wireless Networks menu item. c. If there is more than one wireless
  • Netgear WG311v2 | WG311v2 User Manual - Page 23
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Verify wireless connectivity to your network. a. Open the WG311 v2 utility by clicking on the icon in the Windows system tray. Note: When the Windows XP wireless configuration utility is enabled (the default), only these two
  • Netgear WG311v2 | WG311v2 User Manual - Page 24
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 For Windows 2000 & 98/Me Users Installing a WG311 v2 Install the WG311 v2 software. Note: Windows CD for the WG311 v2 into your CD-ROM drive. The CD main page shown at the right will load. c. Click the "Install Driver & Utility" link
  • Netgear WG311v2 | WG311v2 User Manual - Page 25
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Install the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2. a. Shut down the PC and remove the power cord. Insert the WG311 v2 Wireless PCI Adapter with the NETGEAR logo facing up into an available PCI slot. b. Reconnect the
  • Netgear WG311v2 | WG311v2 User Manual - Page 26
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Configure your WG311 v2 and save the Profile. a. Open the WG311 v2 Smart Wireless Click here to open the configuration utility. Settings Utility by clicking on the icon in the Windows system tray. The utility WG311 v2
  • Netgear WG311v2 | WG311v2 User Manual - Page 27
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Verify wireless connectivity to your network. a. Verify that your connection information matches your wireless network. Note: You can use the Networks tab to verify the availability of wireless networks and their SSIDs. For
  • Netgear WG311v2 | WG311v2 User Manual - Page 28
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 WG311 v2 Wireless Connection Indicators The NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 SysTray icon, which is on the System Tray portion of the taskbar in the Microsoft Windows desktop, is an indicator that gives you
  • Netgear WG311v2 | WG311v2 User Manual - Page 29
    . Also, for problems with accessing network resources, the Windows software might not be installed and configured properly on your computers. Please refer to Appendix C, "Preparing Your PCs for Network Access" of the Reference Manual on the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Resource CD
  • Netgear WG311v2 | WG311v2 User Manual - Page 30
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 About Page The About page displays important information about the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2. Figure 2-1: About page The About page shows the following information: • Regional Domain: This is the region
  • Netgear WG311v2 | WG311v2 User Manual - Page 31
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 • MAC Address: The MAC address of this adapter. The Media Access Control address is a unique 48-bit hardware address assigned to every network interface card. Some wireless networks will restrict access based on a list of known
  • Netgear WG311v2 | WG311v2 User Manual - Page 32
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 2-16 Basic Setup
  • Netgear WG311v2 | WG311v2 User Manual - Page 33
    how to configure your NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features. Note: The instructions in this section refer to the NETGEAR WG311 v2 configuration utility. Windows XP users must
  • Netgear WG311v2 | WG311v2 User Manual - Page 34
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 For example, if you use your PC to connect to a wireless network in an office and a wireless network in your home, you can create a profile for each wireless network. Then, you can easily load the profile that has all the configuration
  • Netgear WG311v2 | WG311v2 User Manual - Page 35
    highlighted SSID is the one currently connected. Connect to an Access Point in Infrastructure Mode This section provides instructions for configuring the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 to connect to a wireless access point. How to Configure an Infrastructure Mode Profile Follow the
  • Netgear WG311v2 | WG311v2 User Manual - Page 36
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 b. Click on the Settings tab to display the view shown below. Figure 3-2: Settings tab page 2. Configure the wireless Network settings. a. In the Network Type section, be sure that Infrastructure is selected. b. Enter the
  • Netgear WG311v2 | WG311v2 User Manual - Page 37
    such as adding IPX protocol support. For instructions on setting up static IP addresses or IPX protocol settings on a Windows PC, refer to the PC Networking Tutorial included on the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Resource CD. Follow the instructions below to configure an Ad-Hoc mode
  • Netgear WG311v2 | WG311v2 User Manual - Page 38
    protocol. Note: For instructions on configuring static IP addresses or the IPX protocol, refer to the networking tutorial on your NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Resource CD. b. Restart the PCs. 4. Verify wireless connectivity between your peer devices. Verify connectivity by using the
  • Netgear WG311v2 | WG311v2 User Manual - Page 39
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type ping -t 192.168.0.1 and then click OK. c. This will cause a continuous ping to be sent to the
  • Netgear WG311v2 | WG311v2 User Manual - Page 40
    the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Figure 3-4: Ad-Hoc Setting page 4. In the Start Ad-Hoc field, choose the wireless standard (802.11b or 802.11g) for your Ad-Hoc computer-to-computer network. 5. In the Channel field, Automatic should work. If you notice interference problems with
  • Netgear WG311v2 | WG311v2 User Manual - Page 41
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Identifying the Wireless Network Name (SSID) and WEP Security Settings Print this form, fill in the configuration parameters and put it in a safe place for possible future reference. For an existing wireless network, the person
  • Netgear WG311v2 | WG311v2 User Manual - Page 42
    NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 How to Configure WEP Encryption Security Following the steps below to configure WEP Encryption Security. 1. Run the WG311 v2 Configuration Utility. a. Open the configuration utility by clicking on the WG311 v2 icon system tray. in the Windows Figure
  • Netgear WG311v2 | WG311v2 User Manual - Page 43
    the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Tip: You can click the Networks tab to view a list of the available wireless networks and their SSIDs at your location. 3. Save your settings in a Profile. a. Type a descriptive name for the Profile name. b. Click Save Profile. All the configuration
  • Netgear WG311v2 | WG311v2 User Manual - Page 44
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Statistics Page The Statistics page provides real time and historical trend information on the data traffic and performance of your wireless adapter per second (Rx Packets/s), total received packets, and received errors. 3-12 Configuration
  • Netgear WG311v2 | WG311v2 User Manual - Page 45
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Advanced Settings Page Generally, the Advanced settings should not require adjustment. Except for the power saving setting, changing any of the settings incorrectly on this page could cause your wireless connection to fail.
  • Netgear WG311v2 | WG311v2 User Manual - Page 46
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 • RTS/CTS Threshold: The packet size that is used to determine whether it should use the CSMA Multiple Access with Collision Avoidance) mechanism for packet transmission. CSMA/CD is slightly more efficient. 3-14 Configuration
  • Netgear WG311v2 | WG311v2 User Manual - Page 47
    NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2. Antennae Radio Data Rate Frequency Emissions Bus interface Provided drivers TELEC PCI Microsoft Windows 98, 2000, Me, XP 40 g Power, Activity Operating temperature: 0 to 55 degrees C, 32 to 131 degrees F 40-bit (also called 64-bit) and 128-bit WEP data
  • Netgear WG311v2 | WG311v2 User Manual - Page 48
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 A-2 Technical Specifications
  • Netgear WG311v2 | WG311v2 User Manual - Page 49
    Overview The WG311 v2 Wireless PCI Adapter conforms to the Institute of Electrical and Electronics Engineers (IEEE) 802.11b standard for wireless LANs (WLANs) and a product update will bring the WG311 v2 into conformance to the 802.11g standard when it is ratified. On an 802.11b or g wireless link
  • Netgear WG311v2 | WG311v2 User Manual - Page 50
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Ad-Hoc Mode (Peer-to-Peer Workgroup) In an ad-hoc network, computers are brought together as needed; thus, there is no structure or fixed
  • Netgear WG311v2 | WG311v2 User Manual - Page 51
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 802.11 Authentication The 802.11 standard defines several services that govern how two 802.11 devices communicate. The following events must occur before an 802.11 Station can communicate with an Ethernet network through an
  • Netgear WG311v2 | WG311v2 User Manual - Page 52
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 802.11b Authentication Open System Steps 1) Authentication request sent to AP Access Point Client attempting to connect 2) AP authenticates 3) Client connects The station uses its configured 64-bit or 128-bit default key to encrypt the
  • Netgear WG311v2 | WG311v2 User Manual - Page 53
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 802.11 Authentication Shared Key Steps 1) Authentication request sent to AP 2) AP sends challenge text Client 3) Client encrypts attempting challenge text and to connect sends it back to AP Access Point (AP) Cable/DSL
  • Netgear WG311v2 | WG311v2 User Manual - Page 54
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Key Size The IEEE 802.11 standard supports two types of WEP encryption: 40-bit and 128-bit. The 64-bit WEP data encryption method, allows for a five-character (40-bit) input. Additionally, 24 factory-set bits are added to the forty-bit
  • Netgear WG311v2 | WG311v2 User Manual - Page 55
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Note: Whatever keys you enter for an AP, you must also enter the same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match WEP key 1 on the client adapter Wireless Channels IEEE 802.11b and g wireless
  • Netgear WG311v2 | WG311v2 User Manual - Page 56
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 The radio frequency channels used are listed in Table 3-1: Table 3-1. 802.11b and g Radio Frequency Channels Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 Center Frequency 2412 MHz 2417 MHz 2422 MHz 2427 MHz 2432 MHz 2437 MHz 2442
  • Netgear WG311v2 | WG311v2 User Manual - Page 57
    describes how to prepare your PCs to connect to the Internet through the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2. For adding file and print sharing to your network, please consult the Windows help information included with the version of Windows installed on each computer on your network
  • Netgear WG311v2 | WG311v2 User Manual - Page 58
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 1. On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network icon. The Network window opens, which displays a list of installed components: You must have an
  • Netgear WG311v2 | WG311v2 User Manual - Page 59
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 d. Select Client for Microsoft Networks, and then click PC for the changes to take effect. Enabling DHCP to Automatically Configure TCP/IP Settings in Windows 98 and Me After the TCP/IP protocol components are installed, each
  • Netgear WG311v2 | WG311v2 User Manual - Page 60
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Verify the following settings as shown: • Client for Microsoft Network exists • Ethernet adapter is present • TCP/IP is present • Primary Network Logon is set to Windows logon Click on the Properties button. The following TCP/
  • Netgear WG311v2 | WG311v2 User Manual - Page 61
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 By default, the IP Address tab is open on this window. • Verify the following: Obtain an IP address automatically is selected. If not selected, click in the radio button to the left of it to select
  • Netgear WG311v2 | WG311v2 User Manual - Page 62
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 2. Type winipcfg, and then click OK. The IP Configuration window opens, which lists (among other things), your IP address, subnet mask, and default gateway. 3. From the drop-down box, select your Ethernet adapter. The window is
  • Netgear WG311v2 | WG311v2 User Manual - Page 63
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 DHCP Configuration of TCP/IP in Windows XP or 2000 You will find there are many similarities in the procedures for different Windows systems when using DHCP to configure TCP/IP. The following steps will walk you through the configuration
  • Netgear WG311v2 | WG311v2 User Manual - Page 64
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Now you should be at the Local Area Network Connection Status window. This box displays the connection status, duration, speed, and activity statistics. Administrator logon access rights are needed to use this window. • Click
  • Netgear WG311v2 | WG311v2 User Manual - Page 65
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Verify that Obtain an IP address automatically radio button is selected and that the Obtain DNS server address automatically radio button is selected. • Click the OK button. This completes the DHCP configuration in Windows XP.
  • Netgear WG311v2 | WG311v2 User Manual - Page 66
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 The Local Area Connection Properties dialog box appears. Verify that you have the correct Ethernet card selected in the Connect using: box and that the following two items are displayed and selected in the box of "Components
  • Netgear WG311v2 | WG311v2 User Manual - Page 67
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 Verifying TCP/IP Properties for Windows XP or 2000 To check your PC's TCP/IP configuration: 1. On the Windows taskbar, click the Start button, and then click Run. The Run window opens. 2. Type cmd and then click OK. A command window
  • Netgear WG311v2 | WG311v2 User Manual - Page 68
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 C-12 Preparing Your PCs for Network Access
  • Netgear WG311v2 | WG311v2 User Manual - Page 69
    manual. 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over twisted pair wiring. 100BASE-Tx IEEE 802.3 specification for 100 Mbps Ethernet over twisted pair wiring. 802.11b IEEE specification for wireless network configuration information to (or Service), an Internet service that translates
  • Netgear WG311v2 | WG311v2 User Manual - Page 70
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 198.105.232.4. The DNS system is, in Service Set Identification (ESSID) is a thirty-two character (maximum) alphanumeric key identifying the wireless local area network. Gateway A local device, usually a router, that connects
  • Netgear WG311v2 | WG311v2 User Manual - Page 71
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 used for additional error recovery services. ISP Internet service provider. Internet Protocol The main most common for connecting personal computers. MAC address The Media Access Control address is a unique 48-bit hardware address assigned
  • Netgear WG311v2 | WG311v2 User Manual - Page 72
    Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 packet . WAN A long distance link used to extend or connect remotely located local area networks. The Internet is a large 802.11b wireless networks. All wireless nodes and access points on the network are configured with a 64-bit or 128-bit
  • Netgear WG311v2 | WG311v2 User Manual - Page 73
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 wide area network WAN. A long distance link used to extend or connect remotely located local area networks. The Internet is a large WAN. Wi-Fi A trade name for the 802.11b wireless networking standard, given by the Wireless
  • Netgear WG311v2 | WG311v2 User Manual - Page 74
    Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2 6 Glossary
  • Netgear WG311v2 | WG311v2 User Manual - Page 75
    for Windows 1, 6 O Open System authentication 2 S Shared Key authentication 2 SSID 3, 2 T TCP/IP properties verifying for Windows 5 W WEP 4, 8, 2 Wi-Fi 1 Windows, configuring for IP routing 1, 6 winipcfg utility 5 Index Index Wired Equivalent Privacy. See WEP Wireless Ethernet 1 wireless network
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Version v1.1
December 2003
NETGEAR
, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
Installation Guide for the
NETGEAR 54 Mbps
Wireless PCI Adapter
WG311 v2