Netgear WN802T-100NAS Reference Manual - Page 29
Configuring and Testing Your PCs for Wireless Connectivity, Logging in to the RangeMax NEXT
View all Netgear WN802T-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
RangeMax NEXT Wireless Access Point WN802T Reference Manual Step 1 Step 2 Step 3 Figure 2-5 Configuring and Testing Your PCs for Wireless Connectivity Program the wireless adapter of your PCs to have the same SSID and channel that you configured in Wireless Settings for the WN802T. Check that they have a wireless link and are able to obtain an IP address by DHCP from the WN802T. Note: If you are configuring the WN802T from a wireless computer and you change the SSID, channel, or Security Profile settings, you will lose your wireless connection when you click Apply. You must then change the wireless settings of your computer to match the new settings. Once your PCs have basic wireless connectivity to the WN802T, you can deploy the WN802T and configure the advanced wireless security functions. Logging in to the RangeMax NEXT The WN802T is set, by default with the IP address of 192.168.0.233 with DHCP disabled. Note: If logging in using the default IP address, the computer you are using to connect to the WN802T should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0. Installation and Configuration v1.3, August 2006 2-11