Netgear WNR2200 WNR2200 Installation Guide - Page 2

"No CD Drive" Installation Set up Internet access 1. In the address field of your browser, type http://www.routerlogin.net and click Enter. 2. Enter the router User Name admin and default Password password to open your router's main settings page. 3. When the main settings page opens, you will be asked if you want to "Check for Update." Click Cancel. You can always check for new firmware later after you are connected to the Internet. 4. Select the first menu item on the left: Setup Wizard. Make sure Yes is selected. Then click Next and follow the prompts to complete the Setup Wizard. When the Setup Wizard has completed detecting your connection, the Basic Settings page displays showing your settings. You are now connected to the Internet. Note: If your ISP requires that you enter a User Name or Password, you will be prompted to enter this information. If you do not have this information, contact your ISP. After connecting to the Internet, you can check for firmware updates by selecting Router Upgrade and following the on-screen prompts. July 2010 Set up wireless security You should set up a secure wireless network. Once your router security is established, your wireless laptops, gaming devices (such as Wii or Play station 3 with wireless), or other wireless equipment can safely and securely connect to the Internet. 1. From the main menu page, select Wireless Settings.* *Your router menu may display different or additional features not shown in this image. 2. First, name your wireless network. Choose a name that is easy for you to remember. You might want to write it down here the default name is NETGEAR). 3. Select your security method. NETGEAR recommends WPA-PSK (TKIP) +WPA2PSK (AES). Then, enter a Passphrase. In the example, we entered HomeNetwork. You might want to write your Passphrase down here Note: Both your Network Name (SSID) and Passphrase are case sensitive. Your Network name, Security method and Passphrase must be the same on all the wireless devices connected to your router. 4. Click Apply and close your browser. Connect Wireless Devices to Your Router Enter your wireless information here: Wireless Network Name (SSID Wireless Security Passphrase If you don't remember your Passphrase, type http://www.routerlogin.net into your browser and log in by entering your User Name admin and Password (default is password). Then, select Wireless Settings to retrieve your Passphrase. You can add wireless computers and other equipment to your wireless network: 1. Open the wireless software that manages your wireless connections on the wireless device (iPhone, laptop computer, gaming device) that you want to connect to your router. 2. The wireless software will scan for all wireless networks in your area. Look for your network-the one you named when you set up your router. Select it. 3. If you have set up security, you will be prompted for a Passphrase or network key. Enter the Passphrase you created and click Connect. 4. Repeat steps 1 - 3 to add other wireless devices. If your wireless device supports WPS (WiFi Protected Setup)-NETGEAR calls this method Push 'N' Connect-you might be prompted to press a WPS button on the router instead of entering a Passphrase. Then: 1. Press the WPS button on the router. It will look similar to or . 2. Within 2 minutes, press the WPS button on your wireless device, or follow the WPS instructions that came with your wireless device. The device will then be connected to your router. 3. Repeat steps 1 and 2 to add other WPS wireless devices. For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://kb.netgear.com/app/answers/detail/a_id/11621/ © 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.