Netgear WPN311 WPN311 Reference Manual - Page 35
Setting up WEP Encryption Security, Run the WPN311 Smart Wizard.
UPC - 606449039870
View all Netgear WPN311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
NETGEAR RangeMax Wireless PCI Adapter WPN311 User Manual Setting up WEP Encryption Security Follow the steps below to configure WEP Encryption Security. 1. Run the WPN311 Smart Wizard. a. Make sure the WPN311 software is installed and the WPN311 Wireless PCI Adapter is installed in a PCI slot in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens: Figure 2-9 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the SSID entered exactly matches the SSID used by the access point. c. In the Security section, select WEP. 3. Select the WEP encryption strength you will use: • 64-bit WEP data encryption • 128-bit WEP data encryption v3.0, January 2007 2-13