Netgear WPNT121 WPNT121 User Manual - Page 28
Restart the PCs - windows 8
View all Netgear WPNT121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
NETGEAR RangeMax™ 240 Wireless USB 2.0 Adapter WPNT121 User Manual 3. Save your settings in a Profile. a. Click Save Profile. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the Smart Wizard, or Cancel to return to the previous settings. 4. Configure the PC network settings. a. Configure each PC with either a static IP address or with the IPX protocol. b. Restart the PCs. 5. Verify wireless connectivity between your peer devices. You can use the ping utility to verify your wireless connection: a. On the Windows taskbar click Start, and then click Run. b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type ping -t 192.168.0.1 and then click OK. Figure 3-4 c. This sends a continuous ping to the device with the 192.168.0.1 static IP address. The ping response should change to "reply." Figure 3-5 3-6 v1.0, February 2006