Nextar Q3 Q3 Hardware Manual
Nextar Q3 Manual
 |
UPC - 714129943116
View all Nextar Q3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Nextar Q3 manual content summary:
- Nextar Q3 | Q3 Hardware Manual - Page 1
. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. 1 - Nextar Q3 | Q3 Hardware Manual - Page 2
with the manufacturer's instructions. 8) Do not attachments/accessories specified by the manufacturer. 12) Use 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing only as a navigational aid. Do - Nextar Q3 | Q3 Hardware Manual - Page 3
Function: The unit is designed to provide you with route suggestions. It supports voice navigation. Other Special Functions SD Card and USB Input: unit is designed with SD card and USB ports, can be connected to SD card or other USB device for file loading. Power Adapter Switch: Automatically - Nextar Q3 | Q3 Hardware Manual - Page 4
Accessories Accessories List ITEM NAME Remote Control (with battery) QTY 1 Owner's Manual 1 Power Adaptor 1 Car Adaptor 1 USB Cable 1 Windshield mount bracket 1 Mounting cradle 1 Dashboard mount disk 1 Pouch 1 NOTE Accessories and their part numbers are subject to modification - Nextar Q3 | Q3 Hardware Manual - Page 5
Contents Important Safety Instructions Features Accessories View of Main Unit Remote Control System Connections Power Supply Preparation General Setup Playing Music Using the Mounting Bracket Troubleshooting Specifications 1 3 4 6 8 9 11 13 16 19 20 21 5 - Nextar Q3 | Q3 Hardware Manual - Page 6
enter the main menu. 2. Speakers 3. Charge Indicator When charging the battery, it is red; When the battery is fully charged, it turns green. 4. POWER button Press the POWER button to enter or exit the standby mode. 5. LCD Screen 6. Remote Sensor Receive signal from remote control for operation. 6 - Nextar Q3 | Q3 Hardware Manual - Page 7
1. Card Port Insert the SD/MMC card into the port. 2. USB port Used to connect to the USB device. Rear View 1. Volume Control Used Used to connect to the supplied power adaptor or car adapter. 1. GPS Antenna Receiving GPS signals. 2. External Antenna Jack Connected to the external antenna. 3. - Nextar Q3 | Q3 Hardware Manual - Page 8
Remote Control 1. POWER button Press to enter or exit standby mode. 2. direction MENU button Press to enter the main menu. 6. - button Press to zoom out the map. 7. MAP button Press to activate the navigation function. 8. MUTE button Press to turn on or off the speaker output. 9. BACK button - Nextar Q3 | Q3 Hardware Manual - Page 9
System Connections Always ensure that the unit, and any other external See the below figure for details: 1. You should install the driver into your PC first. You can download the driver (MSASYNC) via the Internet from web site: http://www.nextar.com 2. Turn on the unit. 3. Connect the unit to the - Nextar Q3 | Q3 Hardware Manual - Page 10
System Connections Inserting SD Card The unit is designed with SD/MMC Card jack which allows you to insert the SD/MMC card into the unit as shown below: Connecting to Headphones Connect the headphones to the right side of the unit for private listening. When headphone is - Nextar Q3 | Q3 Hardware Manual - Page 11
Plug to the unit's power jack and plug the other end to the vehicle's 5V accessory/ cigarette socket, as shown on the right figure. Attention Do not operate the unit the vehicle. Your portable GPS player comes with a built-in rechargeable battery. Please see details in the following segment. - Nextar Q3 | Q3 Hardware Manual - Page 12
Battery Your portable GPS player comes with a built-in rechargeable battery. Charge the battery fully before initial use. Charging time is normally about 3.5 hours. A fully charged battery battery New batteries should be fully charged before initial use. Battery product. When the battery is weak, an - Nextar Q3 | Q3 Hardware Manual - Page 13
main menu for about 3~5 seconds and then enter the warning menu, as shown below: Tap I Agree to enter the map view. Press the MENU button to return to the main menu. In the main menu, there are three items for below: Tap the buttons to select language, tap Dto confirm and tap U to cancel. 13 - Nextar Q3 | Q3 Hardware Manual - Page 14
General Setup Backlight Tap in the main menu to enter the backlight settings menu, as shown below: Tap the buttons to adjust the brightness, tap Dto confirm and tap U to cancel. Date & Time Tap in the main menu, the screen will display as below: Tap buttons to select time zone, tap buttons to - Nextar Q3 | Q3 Hardware Manual - Page 15
General Setup Power Tap in the main menu, the screen will display as below: The menu will display the battery status. Tap the button to return. Screen Tap in the main menu, the screen will display as below: Tap the + button as it moves around - Nextar Q3 | Q3 Hardware Manual - Page 16
, in order to avoid the misoperation which can result in the map data missing and lost. The unit is designed with SD/MMC card slot. You can insert the SD/MMC card with MP3, WMA files. It supports MP3 and WMA format files playback. Take the following steps to play: Loading MP3 or WMA format files - Nextar Q3 | Q3 Hardware Manual - Page 17
Playing Music In the menu, if there are no songs in the playlist, tap the playlist. The screen will display as below: button to add songs into the Double tap MMC_Storage to open the folder, the songs in the folder will be displayed on the screen. Select the songs that you want to add into the - Nextar Q3 | Q3 Hardware Manual - Page 18
Playing Music During playback, tap button to go to the previous track. During playback, tap button to go to the next track. During playback, tap resume playback. button to pause playback, or in stop status, tap the button to During playback, tap button to stop playback. During playback, tap - Nextar Q3 | Q3 Hardware Manual - Page 19
Using the Mounting Bracket When using the unit in vehicle, you can use the supplied mounting assemblies (mounting bracket, mounting cradle and dashboard mount disk) to mount the unit in the vehicle. Take the following steps to operate: 1. Slide the mounting cradle onto the end of the mounting - Nextar Q3 | Q3 Hardware Manual - Page 20
between the remote control and the player. The remote control may not Point the remote control at be pointed at the player. the player directly. The batteries of remote control may not be inserted correctly. Make sure the polarity of each battery is correct. The batteries of remote control may - Nextar Q3 | Q3 Hardware Manual - Page 21
Specifications TFT screen size 3.5 inches Frequency Response 20Hz 20kHz Audio Signal-to-noise Rate 65dB Audio distortion or noise 20dB (1kHz) Channel Separation 70dB (1kHz) Dynamic Range 80dB (1kHz) Power AC 100-240V 50/60Hz Power Consumption < 8W Dimensions 130mmX74mmX24mm - Nextar Q3 | Q3 Hardware Manual - Page 22
(Hong Kong) Limited. Nextar is a trademark and service mark of Nextar (Hong Kong) Limited. All other brand names, trademarks and service marks are property of their owners. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We may reserve the right to do this
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
1
POWER SUPPLY
:
Connect the supplied adapter to the side of the unit in the slot marked “Power In”. Plug
the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty
inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time,
disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION:
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
Important Safety
Instruction
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.