Nikon COOLPIX B600 Reference Guide PDF Edition - Page 147

D Cautions: Burst Photography • Depending on shooting conditions and memory card performance, the memory card access lamp may light for anywhere from a few tens of seconds to around a minute. Do not remove the memory card while the memory card access lamp is lit. Not only could any unrecorded pictures be lost, but the camera or memory card could be damaged. • At shutter speeds slower than 1/250 s, the shooting display does not update in real time during burst photography. To track your subject during shooting, choose shutter speeds faster than 1/250 s. • If the camera is switched off while the memory card access lamp is lit, it will not power off until all pictures in the buffer have been recorded. • If the battery is exhausted while pictures remain in the buffer, the shutter release will be disabled and the pictures transferred to the memory card. A The Memory Buffer • While the shutter-release button is pressed halfway, the frame-count display will show the number of pictures that can be stored in the memory buffer. • When the buffer is full, the display will show r000 and the frame rate will drop. • The number shown is approximate. The actual number of photos that can be stored in the memory buffer varies with camera settings and shooting conditions. Release Mode 147