Nikon D500 100th Anniversary Edition User Manual - Page 379

Flicker or banding appears during movie recording: Choose an option for Flicker reduction that matches the frequency of the local AC power supply (0 290). Bright regions or bands appear in live view: A flashing sign, flash, or other light source with brief duration was used during live view. Smudges appear in photographs: Clean front and rear lens elements. If problem persists, perform image sensor cleaning (0 338). Live view ends unexpectedly or does not start: Live view may end automatically to prevent damage to the camera's internal circuits if: • The ambient temperature is high • The camera has been used for extended periods in live view or to record movies • The camera has been used in continuous release modes for extended periods If live view does not start when you press the a button, wait for the internal circuits to cool and then try again. Note that the camera may feel warm to the touch, but this does not indicate a malfunction. Image artifacts appear during live view: "Noise" (randomly-spaced bright pixels, fog, or lines) and unexpected colors may appear if you zoom in on the view through the lens (0 46) during live view; in movies, the amount and distribution of randomly-spaced bright pixels, fog, and bright spots are affected by frame size and rate (0 68). Randomly-spaced bright pixels, fog, or bright spots may also arise as a result of increases in the temperature of the camera's internal circuits during live view; exit live view when the camera is not in use. Can not measure white balance: Subject is too dark or too bright (0 170). Image can not be selected as source for preset white balance: Image was not created with D500 (0 177). 353