Nikon D500 Users Manual - English for customers in the Americas - Page 407
Supplied Accessories for AF-S DX NIKKOR 16-80mm f/2.8-4E ED VR Lenses, mm Snap-on Front Lens Cap LC-72
View all Nikon D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 407 highlights
A Supplied Accessories for AF-S DX NIKKOR 16-80mm f/2.8-4E ED VR Lenses • 72 mm Snap-on Front Lens Cap LC-72 • Rear Lens Cap LF-4 • Bayonet Hood HB-75 Align the lens hood mounting mark (●) with the lens hood alignment mark ( ) as shown in Figure q and then rotate the hood (w) until the ● mark is aligned with the lens hood lock mark (-). When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached. The hood can be reversed and mounted on the lens when not in use. To detach the lens hood, press the lens hood lock release button (q), rotate the hood in the direction shown by the arrow (w), and remove it as shown (e). 381
381
A
Supplied Accessories for AF-S DX NIKKOR 16–80mm f/2.8–4E ED VR Lenses
•
72 mm Snap-on Front Lens Cap LC-72
•
Rear Lens Cap LF-4
•
Bayonet Hood HB-75
Align the lens hood mounting mark (
●
) with the lens hood alignment
mark (
) as shown in Figure
q
and then rotate the hood (
w
) until
the
●
mark is aligned with the lens hood lock mark (—
).
When attaching or removing the hood, hold it near the symbol on its
base and avoid gripping it too tightly.
Vignetting may occur if the
hood is not correctly attached.
The hood can be reversed and
mounted on the lens when not in use.
To detach the lens hood, press the lens hood lock release button (
q
),
rotate the hood in the direction shown by the arrow (
w
), and remove
it as shown (
e
).