Nikon N65 Instruction Manual - Page 107
Nikkor for F3AF and IX-Nikkor
UPC - 018208123452
View all Nikon N65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Autofocus TIL phase detection, Nikon Multi-CAM900 autofocus module with AF-Assist Illuminator (approx. 0.5m-3m or 1.6-9.8 ft.) • Detection range: EV -1 to EV 19 (ISO 100, at normal temperature) Lens servo AF: Auto-Servo AF: camera automatically chooses Single Servo AF or Continuous Servo AF operation according to the subject status, i.e. stationary or moving (including directional information). • Single Servo AF (focus is locked when the subject is in-focus) • Continuous Servo AF (camera continues to focus on a moving subject) Focus Tracking with Lock-Onrr>1 automatically activated by subject's status M: Manual focus Focus area One of five focus areas can be selected Focus Area mode • Dynamic AF Mode with Closest-Subject Priority • Dynamic AF Mode • Single Area with M focus mode Metering system TIL full-aperture exposure metering system Three metering systems selectable (limitations with lens used) • 3D six-segment Matrix Metering: with 0- or G-type AF Nikkor • Six-segment Matrix Metering: with AF Nikkor other than 0- or G- type (except AF Nikkor for F3AF and IX-Nikkor), AI-P Nikkor • Center-Weighted Metering: automatically selected with Manual exposure mode Metering range 3D Matrix Metering: EV 1-20 Center-Weighted Metering: EV 1-20 (at normal temperature, ISO 100, f/1.4 lens) Exposure meter coupling CPU Exposure Compensation ~osure compensated in ±2 EV range, in 1/2 steps (except in M or Auto Exposure Bracketing Film speed setting Bracketing range: ±2 EV; number of ~ots: three; bracketing steps: 0.5, 1, 1.5 or 2 EV (except in or Vari-Program) • Automatically set to ISO film speed of OX-coded film in use (manual not selectable) • Film speed range: OX: ISO 25-5000, automatically set to ISO 100 with non-OX-coded film 107