Nikon Z 6 Reference Guide PDF Edition - Page 851

To begin calibration, press the calibration button for about a second. The charge lamps and calibration lamp light red while calibration is in progress. The display can be read as follows: Approximate time needed to recalibrate battery Under 2 hours 2-4 hours 4-6 hours Over 6 hours 2h I (off) Charge lamps 4h I (off) 6h I (off) K (on) I (off) I (off) K (on) K (on) I (off) K (on) K (on) K (on) Calibration lamp K (on) K (on) K (on) K (on) Although calibration is recommended for accurate measurement of battery charge state, calibration need not be performed when the calibration lamp flashes. Once begun, calibration can be interrupted as desired. • If the calibration button is not pressed while the calibration lamp is flashing, normal charging will begin after about ten seconds. • To interrupt calibration, press the calibration button again. Calibration will end and charging will begin. When calibration is complete, the charge lamps and calibration lamp will turn off and charging will begin immediately. Compatible Accessories 851