Nintendo RVLSKRP2 User Manual - Page 12
Installing Batteries cont., Installing the Wii MotionPlus accessory
View all Nintendo RVLSKRP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
System Setup System Setup Installing Batteries (cont.) 1. Slide the lock switch on the back of the Wii MotionPlus accessory down, towards the bottom of the Wii Remote. 3. Pull the strap out through the hole. IMPORTANT: Pull carefully to be sure the strap does not catch on the jacket. Slide the switch down 2. Press and hold the release buttons and pull the accessory out of the External Extension Connector on the bottom of the Wii Remote. Gently pull the sensor unit down and towards the back of the Wii Remote. 4. Pull the Wii Remote out of the jacket. Hold down both release buttons NOTE: Battery life can be checked by pressing the Home Button. See pages 64-65, Wii Operations Manual - Channels and Settings, for more information. 20 5. Remove the battery cover and insert the batteries into the battery compartment. Be sure to insert the minus (-) end first when inserting new batteries, and remove the plus (+) end first when replacing the batteries. Replace the battery cover. IMPORTANT: Insert the minus (-) end first Installing the Wii MotionPlus accessory 1. Make sure the lock on the back of the accessory is in the unlocked position, with the arrow visible. The white arrow is visible when unlocked 4. While twisting slightly, gently pull the sensor unit down and over the end of the Wii Remote. Angle the sensor unit so that the jacket doesn't catch on the corners of the Wii Remote 2. Insert the Wii Remote all the way into the Wii MotionPlus Jacket. Jacket 3. Insert the wrist strap through the hole from the inside of the jacket and pull completely through until you can see the cord. IMPORTANT: Pull carefully to be sure the strap does not catch on the jacket. Insert the Wii Remote all the way 5. Hold down the lock release buttons on both sides of the accessory and insert the plug into the External Extension Connector on the bottom of the Wii Remote. Pull gently until you can see the cord 6. Make sure that neither the wrist strap or jacket are pinched between the Wii Remote and the accessory. Make sure the wrist strap is pulled completely through Sensor unit Hold down both lock release buttons 21 System Setup