Nintendo RVLSWC User Manual - Page 12

Installing Batteries cont., Installing the Wii MotionPlus accessory

Page 12 highlights

System Setup System Setup Installing Batteries (cont.) 1. Slide the lock switch on the back of the Wii MotionPlus accessory down, towards the bottom of the Wii Remote. 3. Pull the strap out through the hole. IMPORTANT: Pull carefully to be sure the strap does not catch on the jacket. Slide the switch down 2. Press and hold the release buttons and pull the accessory out of the External Extension Connector on the bottom of the Wii Remote. Gently pull the sensor unit down and towards the back of the Wii Remote. 4. Pull the Wii Remote out of the jacket. Hold down both release buttons NOTE: Battery life can be checked by pressing the Home Button. See pages 64-65, Wii Operations Manual - Channels and Settings, for more information. 20 5. Remove the battery cover and insert the batteries into the battery compartment. Be sure to insert the minus (-) end first when inserting new batteries, and remove the plus (+) end first when replacing the batteries. Replace the battery cover. IMPORTANT: Insert the minus (-) end first Installing the Wii MotionPlus accessory 1. Make sure the lock on the back of the accessory is in the unlocked position, with the arrow visible. The white arrow is visible when unlocked 4. While twisting slightly, gently pull the sensor unit down and over the end of the Wii Remote. Angle the sensor unit so that the jacket doesn't catch on the corners of the Wii Remote 2. Insert the Wii Remote all the way into the Wii MotionPlus Jacket. Jacket 3. Insert the wrist strap through the hole from the inside of the jacket and pull completely through until you can see the cord. IMPORTANT: Pull carefully to be sure the strap does not catch on the jacket. Insert the Wii Remote all the way 5. Hold down the lock release buttons on both sides of the accessory and insert the plug into the External Extension Connector on the bottom of the Wii Remote. Pull gently until you can see the cord 6. Make sure that neither the wrist strap or jacket are pinched between the Wii Remote and the accessory. Make sure the wrist strap is pulled completely through Sensor unit Hold down both lock release buttons 21 System Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

Hold down both
release buttons
IMPORTANT:
Insert the minus
(–) end first
The white arrow is visible
when unlocked
Hold down both lock
release buttons
Sensor unit
Angle the sensor unit so
that the jacket doesn’t catch on
the corners of the Wii Remote
Pull gently
until you can
see the cord
Make sure the
wrist strap is pulled
completely through
Jacket
Insert
the Wii
Remote all
the way
20
21
System Setup
System Setup
Installing Batteries (cont.)
1. Slide the lock switch on the
back of the Wii MotionPlus
accessory down, towards the
bottom of the Wii Remote.
2. Press and hold the release
buttons and pull the accessory
out of the External Extension
Connector on the bottom of the
Wii Remote. Gently pull the
sensor unit down and towards
the back of the Wii Remote.
3. Pull the strap out through
the hole.
IMPORTANT: Pull carefully
to be sure the strap does not
catch on the jacket.
4. Pull the Wii Remote out of
the jacket.
5. Remove the battery cover and
insert the batteries into the
battery compartment. Be sure
to insert the minus (-) end first
when inserting new batteries,
and remove the plus (+) end
first when replacing the
batteries.
Replace the battery cover.
System Setup
4. While twisting slightly,
gently pull the sensor unit
down and over the end of the
Wii Remote.
5.
Hold down the lock release
buttons on both sides of the
accessory and insert the plug
into the External Extension
Connector on the bottom of the
Wii Remote.
6.
Make sure that neither the
wrist strap or jacket are
pinched between the Wii
Remote and the accessory.
Installing the Wii MotionPlus accessory
1. Make sure the lock on the back of
the accessory is in the unlocked
position, with the arrow visible.
2. Insert the Wii Remote all the way
into the Wii MotionPlus Jacket.
3. Insert the wrist strap through the
hole from the inside of the jacket
and pull completely through until
you can see the cord.
IMPORTANT: Pull carefully to be
sure the strap does not catch on
the jacket.
NOTE: Battery life can be checked by pressing the Home Button. See pages
64-65, Wii Operations Manual - Channels and Settings, for more information.
Slide the switch down