Nokia 6233 User Guide - Page 23
Switch the phone on and off, Set the time, time zone, and date, Plug and play service - code
View all Nokia 6233 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1. Connect the charger to a wall outlet. 2. Connect the plug from the charger into the CA-44 charging adapter (not provided with the phone), and the adapter plug into the jack on the bottom of your phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger and the battery used. For example, charging a BP-6M Li-Ion battery with the AC-4 charger takes about 1 hour and 55 minutes while the phone is in the standby mode. ■ Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press and hold the power key as shown. If the phone asks for a PIN or UPIN code, enter the code, and select OK. You can switch on the phone in demo mode without a SIM card inserted. In this mode, all bearer-independent features are available, and you can make emergency calls. Set the time, time zone, and date Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See "Time and date," p. 62. Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See Connect to serv. support in "Configuration," p. 72 and "Configuration settings service," p. 17. Copyright © 2006 Nokia. All rights reserved. 23