Nokia 9300i User Manual - Page 83

Connectivity, Wireless LAN, Setting up an ad hoc network, Cable connection, IP passthrough, Bluetooth

Page 83 highlights

18. Connectivity There are several different connectivity types you can use with your device. You can use wireless connectivity methods such as wireless LAN, Bluetooth or infrared, or a USB (Universal Serial Bus) cable connection for PC Suite or IP passthrough. Wireless LAN You can define access points for wireless LAN to use it for Internet access for applications that need to connect to the Internet. See "Wireless LAN," p. 63. Setting up an ad hoc network With 3rd party applications, ad hoc networks allow wireless stations to communicate directly with each other without any wireless LAN access points. One user creates the ad hoc network and other users then join the network. You must first create an Internet access point for the ad hoc network. To create an Internet access point for an ad hoc network 1. Select Desk > Tools > Control panel, and select Connections > Internet setup. 2. Press New. If you want, you can use an existing access point as a basis for the new one. 3. Define the settings. • Internet settings name - Give a descriptive name for the connection. • Network ID - Select the network ID according to the destination network you want to access with the Internet access point. You can rename, and create new network IDs. Using the correct network ID ensures that the data traffic is routed directly to the desired destination network. Especially VPN (virtual private network) software may restrict data traffic for a certain destination network. • Internet settings type - Select wireless LAN as the connection type. • Network mode - Select Ad hoc. • Network name - Give the network a name. • Security mode - Select WEP if you want to use a WEP (wired equivalent privacy) key for authentication. 4. If you selected WEP as a security mode, you need to configure these settings, too. • WEP key index - Select a number for the WEP key. • WEP key length - Select the appropriate key length. The more bits there are in the key, the higher the level of security. • WEP key type - Select whether you want to enter the WEP key data in hexadecimal format (HEX) or in text form (ASCII). • WEP key data - Enter the WEP key data. The number of characters you can enter depends on the key length you have chosen. For example, keys that are 40 bits long, consist of 5 alphanumeric characters, or 10 hexadecimal characters. 5. Press Finish or Done when you have configured all the settings. If you need to configure advanced settings, press Advanced. See "Configuring advanced Internet access point settings," p. 69. Cable connection You can connect your device to a compatible PC using a CA-53 (USB) cable. Connect the cable to the bottom of the device. See Fig Keys and connectors, p. 11. You can also connect the cable to the desk stand of the device. IP passthrough You can also use a cable for IP passthrough, where the device uses the Internet connection of a computer. You can use IP passthrough as you use any Internet access point, for example for browsing or remote synchronization. Note that you cannot use IP passthrough at the same time as Nokia PC Suite. You can define cable connection settings in Control panel. See "Cable setup," p. 64. Note that you cannot activate modem if you select IP passthrough in cable connection settings. You must use PC Suite connection, or IP passthrough overrides PC Suite with no active IP passthrough connection. Bluetooth This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Generic Access Profile, Serial Port Profile, Dial-Up Networking Profile, Generic Object Exchange Profile, Object Push profile, File Transfer Profile, SIM Access Profile, and Handsfree Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Copyright © 2005-2006 Nokia. All Rights Reserved. 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107

18.
Connectivity
There are several different connectivity types you can use with your device. You can use wireless connectivity methods such as
wireless LAN, Bluetooth or infrared, or a USB (Universal Serial Bus) cable connection for PC Suite or IP passthrough.
Wireless LAN
You can define access points for wireless LAN to use it for Internet access for applications that need to connect to the Internet.
See "Wireless LAN,"
p.
63
.
Setting up an ad hoc network
With 3rd party applications, ad hoc networks allow wireless stations to communicate directly with each other without any
wireless LAN access points. One user creates the ad hoc network and other users then join the network.
You must first create an Internet access point for the ad hoc network.
To create an Internet access point for an ad hoc network
1. Select
Desk
>
Tools
>
Control panel
, and select
Connections
>
Internet setup
.
2. Press
New
. If you want, you can use an existing access point as a basis for the new one.
3.
Define the settings.
Internet settings name
— Give a descriptive name for the connection.
Network ID
— Select the network ID according to the destination network you want to access with the Internet access
point. You can rename, and create new network IDs. Using the correct network ID ensures that the data traffic is routed
directly to the desired destination network. Especially VPN (virtual private network) software may restrict data traffic for
a certain destination network.
Internet settings type
— Select wireless LAN as the connection type.
Network mode
— Select
Ad hoc
.
Network name
— Give the network a name.
Security mode
— Select
WEP
if you want to use a WEP (wired equivalent privacy) key for authentication.
4.
If you selected
WEP
as a security mode, you need to configure these settings, too.
WEP key index
— Select a number for the WEP key.
WEP key length
— Select the appropriate key length. The more bits there are in the key, the higher the level of security.
WEP key type
— Select whether you want to enter the WEP key data in hexadecimal format (
HEX
) or in text form (
ASCII
).
WEP key data
— Enter the WEP key data. The number of characters you can enter depends on the key length you have
chosen. For example, keys that are 40 bits long, consist of 5 alphanumeric characters, or 10 hexadecimal characters.
5. Press
Finish
or
Done
when you have configured all the settings. If you need to configure advanced settings, press
Advanced
.
See "Configuring advanced Internet access point settings,"
p.
69
.
Cable connection
You can connect your device to a compatible PC using a CA-53 (USB) cable. Connect the cable to the bottom of the device.
See
Fig Keys and connectors,
p.
11
.
You can also connect the cable to the desk stand of the device.
IP passthrough
You can also use a cable for
IP passthrough
, where the device uses the Internet connection of a computer. You can use IP
passthrough as you use any Internet access point, for example for browsing or remote synchronization.
Note that you cannot use IP passthrough at the same time as Nokia PC Suite. You can define cable connection settings in
Control
panel
.
See "Cable setup,"
p.
64
.
Note that you cannot activate modem if you select
IP passthrough
in cable connection settings. You must use
PC Suite
connection
, or
IP passthrough overrides PC Suite
with no active IP passthrough connection.
Bluetooth
This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Generic Access Profile, Serial Port
Profile, Dial-Up Networking Profile, Generic Object Exchange Profile, Object Push profile, File Transfer Profile, SIM Access Profile,
and Handsfree Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.
Copyright © 2005-2006 Nokia. All Rights Reserved.
83