Nokia Bluetooth Headset BH-904 User Guide - Page 10
Allow connection to two devices, Clear settings or reset, connected to it.
View all Nokia Bluetooth Headset BH-904 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH When you mute or unmute the microphone, the headset beeps twice. To switch a call between the headset and a compatible connected device, press and hold the answer/end key for about 2 seconds. Allow connection to two devices You can have the headset connected to two devices at the same time. By default, the headset can only be connected to one device at a time. To allow the headset to connect to two devices, switch off the headset, and press and hold the power key, and slide and hold the volume key up for about 5 seconds. The blue indicator light flashes twice. To allow the headset to connect to only one device, switch off the headset, and press and hold the power key, and slide and hold the volume key down for about 5 seconds. The green indicator light flashes twice. If the headset can connect to two devices at the same time and you use redialling or voice dialling, the call is made on the device that you last used to make a call when the headset was connected to it. Clear settings or reset To clear all the pairing settings from the headset, switch off the headset, and press and hold the power key and the answer/end key at the same time for about 5 seconds. The headset beeps twice, and the red and green indicator lights alternate. After the settings are cleared, the headset enters pairing mode. To reset the headset if it stops functioning, even though it is charged, connect the headset to a charger, and press the power key and the answer/ end key at the same time.