Nokia CK 300 User Guide - Page 32
Input device CU-10, Microphone MP-2, is dry and free from dirt and dust.
View all Nokia CK 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installation 3. Attach the pad with the hooks: peel off the protective sheet from the adhesive side, and attach the pad to the underside of the hands-free unit. 4. Press the hands-free unit firmly onto the loop pad, and check that the hands-free unit stays securely in place. Input device CU-10 The input device should be located so that it is within easy reach of the user. When installing the parts of the car kit, ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle (for example, airbags). Ensure that the input device cable reaches to the hands-free unit for connection. The best location to mount the input device is horizontally on the console between the driver's and front passenger's seat so that the input device keys are toward the front of the vehicle. To mount the input device, do as follows: 1. Attach the supplied tape pad to the desired location in the car: peel off the protective sheet from a side of the pad, and press the pad into place. When you peel off the protective sheet, do not touch the adhesive side with a finger. Ensure that the surface where you attach the pad is dry and free from dirt and dust. 2. Peel off the protective sheet from the pad on the underside of the input device and from the other side of the pad attached to the car. 3. Press the pads firmly against each other, and check that the input device stays securely in place. Microphone MP-2 Select the mounting location of the microphone carefully to increase the quality of voice transmission. The best place to mount the microphone is close to the rear view mirror. Mount the microphone so that it points toward the driver's mouth and 32