Nokia CK-600 User Guide - Page 36
Use the power cable CA-153P, Settings, Audio, Music output, Automatic detection
View all Nokia CK-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installation pins on the fuses of the ISO cable. Plug the ISO cable to the two open ISO connectors. 2. Plug the ISO cable to the respective connector on the hands-free unit. 3. Cut the loop indicated with scissors in the figure. 4. Connect the stereo outputs of the hands-free unit to the AUX input of the car radio. Use an appropriate cable specific to your car radio (this cable is not supplied with the car kit). 5. Connect the external input device CU-10 and the microphone MP-2 to the respective connectors on the hands-free unit. 6. To charge a compatible Nokia mobile phone through the car kit, connect one end of the supplied charging cable CA-134 to the hands-free unit and the other end to the 2.0 mm (0.08 inch) charging connector of the phone. 7. Switch on the car kit, press the wheel in the standby mode, and select Settings > Audio > Music output > Automatic detection. Use the power cable CA-153P In this setup, the car radio is muted when you make or receive a call. 36