NordicTrack 1300 Elliptical English Manual - Page 9
Arm 10 into the right Upper Body Arm 12
View all NordicTrack 1300 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Identify the Right Link Arm (10), which is marked with a "Right" sticker. 7 Apply a small amount of grease to the two axles on the Right Link Arm (10) and to two 5/8" Wave Washers (102). Then, slide a Pivot Spacer (71) and a Wave Washer onto each axle. Gradually work the Right Link Arm (10) into the right Upper Body Arm (12) while at the same time working the Right Link Arm into the Right Pedal Arm (8). Tip: These parts are designed to fit tightly. It may be helpful to move the Right Pedal Arm (8) while working these parts into place. Repeat this step for the other side of the elliptical exerciser. 12 Grease 102 71 71 102 8 Grease 10 8. Attach the Right Link Arm (10) to the right Upper Body Arm (12) with a 5/16" x 1" Patch Screw (81), a Large Axle Cover (94), and a 5/16" Washer (104). Then, attach the Right Link Arm (10) to the Right Pedal Arm (8) with a 5/16" x 1" Patch Screw (81), a Small Axle Cover (67), and a 5/16" Washer (104). Tip: If it is difficult to work the Right Link Arm (10) into the right Upper Body Arm (12) and the Right Pedal Arm (8), try working the Right Link Arm in halfway and then tightening the 5/16" x 1" Patch Screws (81) to pull it in the rest of the way. Repeat this step for the other side of the elliptical exerciser. 8 81 67 104 8 12 104 81 94 10 9