NordicTrack 14.9 Elliptical English Manual - Page 11
Attach the Front Stabilizer Cover 8 with two
View all NordicTrack 14.9 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5. Orient the Front Stabilizer Cover (8) as shown, and route the Power Cord (not shown) over 5 the top of the Front Stabilizer Cover. Then, press the Front Stabilizer Cover onto the Frame (1). Attach the Front Stabilizer Cover (8) with two M4 x 16mm Screws (104). 8 104 6. Raise the Upright (4) to the vertical position. While a second person holds the Shield Cover 6 (56) out of the way, secure the Upright with two M10 x 75mm Screws (142). Then, slide the Shield Cover (56) downward onto the Rear Shield (75). 1 4 56 142 75 11
11
6.
Raise the Upright (4) to the vertical position.
While a second person holds the Shield Cover
(56) out of the way, secure the Upright with two
M10 x 75mm Screws (142).
Then, slide the Shield Cover (56) downward onto
the Rear Shield (75).
5.
Orient the Front Stabilizer Cover (8) as shown,
and
route the Power Cord (not shown) over
the top of the Front Stabilizer Cover.
Then,
press the Front Stabilizer Cover onto the
Frame (1).
Attach the Front Stabilizer Cover (8) with two
M4 x 16mm Screws (104).
5
104
1
8
6
142
56
4
75