NordicTrack 2150 Treadmill English Manual - Page 12

11. A ttach the upper end of the Storage Latch (53) to the Frame (56) with a 3/8" x 1 3/4" Bolt (6) 11 and a 3/8" Nut (11). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame. 56 11 6 53 12. R emove the packaging material from the bottom of the Frame (56).  See the inset drawing. Make sure that the 1/2" Rear Leveling Foot Nuts (111) are threaded all the way onto the Rear Leveling Feet (60). Then, turn the two Rear Leveling Feet all the way into the Frame (56). Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 27). If one of the Rear Leveling Feet (60) doesn't sit flat on the floor, turn the Rear Leveling Foot until it is resting on the floor, and then tighten the 1/2" Rear Leveling Foot Nut (111) against the Frame (56). 12 56 60 111 60 56 60 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 29 and 30). 12