NordicTrack Asr 700 Elliptical User Manual - Page 6
M6 x 18mm Patch Screws 57. - wheel
View all NordicTrack Asr 700 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin assembling the elliptical exerciser. Remove the shipping bracket (not shown) inserted into the underside of the Frame (1). Then, remove the two M10 x 120mm Patch Screws (58) and the shipping bracket (not shown) attached to the front of the Frame. Discard the shipping brackets. Do not discard the two M10 x 120mm Patch Screws. Orient the Stabilizer (49) with the Wheels (8) in the position shown. While a second person tips the Frame (1) backward, attach the Stabilizer to the Frame with the two M10 x 120mm Patch Screws (58). 2. Identify the Right Handlebar (36), which is marked with an "R" sticker, and orient it as shown. Attach the Right Handlebar to the Frame (1) with the Upper Body Endcap (34) and three M6 x 18mm Patch Screws (57). Repeat this step to attach the Left Handlebar (22). 2 22 8 58 8 49 1 1 36 34 57 6