NordicTrack C 100 Treadmill Uk Manual - Page 11
If You Do Not Connect The Con
View all NordicTrack C 100 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 1 1/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Right and Left Handrails (84, 85) with four #10 x 1 1/4" Screws (9) and four #10 Star Washers (5). Start all four Screws, and then tighten them. 8 9 5 85 93 9 5 84 9. With the help of a second person, hold the console assembly near the Right Handrail (84) and the Left Handrail (not shown). See the inset drawing. Connect the Upright Wire (81) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 9 Console Assembly Console Wire 81 84 Wire Tie Console Wire 81 11