NordicTrack C 1550 Treadmill User Manual - Page 7
Assembly
View all NordicTrack C 1550 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To watch an assembly video, go to http://productvideo.co/ assembly/sears/ nordictrack or use your mobile phone or smartphone to read the QR code at the right. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • The underside of the walking belt is coated with high-performance lubricant. After shipping, there may be some lubricant on top of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex key one adjustable wrench one Phillips screwdriver To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. With the help of a second person, raise the Upright (73) to the vertical position. Attach the Left Base Leg (85) to the left side of the Upright (73) with two 5/16" x 1" Screws (2). 1 73 Attach the Right Base Leg (not shown) to the 2 right side of the Upright (73) in the same way. 2. Identify the Left and Right Upright Covers (82, 83). Slide the Left Upright Cover (82) onto the left Upright (73). Slide the Right Upright Cover (83) onto the right Upright. Then, press the Left and Right Upright Covers (82, 83) downward until they snap into place. 2 73 82 85 83 7