NordicTrack C 1750 Pro Treadmill English Manual - Page 18
How To Use The Manual Mode
View all NordicTrack C 1750 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
HOW TO USE THE MANUAL MODE 1. Insert the key into the console. Each time you press one of the buttons, the incline will gradually change until it reaches the selected incline setting. See HOW TO TURN ON THE POWER on page 16. Note: It may take a minute for the console to be ready for use. Note: The first time you adjust the incline, you must first calibrate the incline system (see step 4 on page 25). 2. Select the main menu. 5. Monitor your progress with the displays. When you turn on the power, the main menu will appear after the console boots up. Touch the home button in the lower-left corner of the screen (not shown here) to return to the main menu at any time. 3. Start the walking belt and adjust the speed. The console offers several display modes. The display mode that you select will determine which workout information is shown. To select the desired display mode, simply flick or slide the screen. You can also view additional information by touching the red boxes on the screen. Touch the Start button on the screen or press the Start button on the console to start the walking belt. You can also press the Manual Control button on the console, and then touch the Resume button on the screen. The walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph. As you walk or run on the treadmill, the screen can show the following workout information: • The incline level of the treadmill • The elapsed time • The time left (Note: The manual mode does not have a time left countdown.) • The approximate number of calories you have burned If you press one of the numbered 1 Step Speed buttons, the walking belt will gradually change speed until it reaches the selected speed setting. To select a speed setting that includes a decimal- such as 3.5 mph-press two numbered buttons in succession. For example, to select a speed setting of 3.5 mph, press the 3 button and then immediately press the 5 button. Note: This will not function if the console is set to metric units. • The approximate number of calories you are burning per hour • The distance that you have walked or run • The number of vertical feet you have climbed • The speed of the walking belt • A track representing 1/4 mile (400 m) To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button. 4. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered 1 Step Incline/Decline buttons. • Your pace in minutes per mile • Your current lap number • Your heart rate (see step 6) 18