NordicTrack C 9.5 Elliptical English Manual - Page 11

5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). 5 See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie to the Main Wire (110). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Tip: To prevent the Main Wire (110) from falling into the Upright (4), secure the Main Wire with the wire tie. 4 110 Wire Tie 1 Wire Tie 110 6. Tip: Avoid pinching the Main Wire (110). Avoid damaging the indicated plastic tabs. 6 Have a second person hold the Upright (4) on the Frame (1). Attach the Upright (4) with four M10 x 25mm Screws (99) and four M10 Split Washers (105); start all the Screws, and then tighten them. 110 Avoid pinching the Main Wire (110) and avoid damaging the tabs 4 99 105 99 105 1 Tabs 11