NordicTrack C 950i Treadmill English Manual - Page 23
See HOW TO TURN ON THE POWER on Select an onboard workout.
View all NordicTrack C 950i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
8. Turn on the fan if desired. The fan features multiple speed settings and an auto mode. When the auto mode is selected, the speed of the fan will automatically increase and decrease as the speed of the walking belt increases and decreases. Press the fan buttons repeatedly to select a fan speed or the auto mode, or to turn off the fan. 9. When you are finished exercising, remove the key from the console. Step onto the foot rails, press the Stop button, and aindcjulinstetmheusintcblienaetozfetrhoeotrrEeyaToduSm8mil9al yt9od2zae1mr5oa.gTehtehe treadmill when you fold it to the storage position. Next, remove the key from the console and put it in a secure place. When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill's electrical components may wear prematurely. HOW TO USE AN ONBOARD WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 21. 2. Enter your weight. See step 3 on page 21. 3. Select an onboard workout. To select an onboard workout, press the Incline button, the Intensity button, or the Speed button repeatedly until the desired workout appears in the display. When you select an onboard workout, the display will show the duration of the workout. 4. Start the workout. Press the Start button. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking. Each workout is divided into segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/ or incline setting may be programmed for consecutive segments. If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the Speed or Incline buttons; however, when the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. To resume the workout, press the Start button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 23