NordicTrack C4000 Treadmill Uk Manual - Page 8

The Console May Be Damaged When

Get NordicTrack C4000 Treadmill PDF manuals and user guides View all NordicTrack C4000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

4. With the help of a second person, hold the console assembly near the Uprights (73, 74). Connect the Upright Wire Harness (75) to the Console Wire Harness (71). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Upright Wire Harness (75). 4 Console Assembly 71 75 73 Wire Tie 71 75 74 5. Insert the brackets on the Handrails (99) into the Right Upright (74) and the Left Upright (73). Make sure that no wires are pinched. 5 99 73 99 74 6. Partially tighten three Handrail Bolts (64) with three Upright Star Washers (90) into the Right Upright (74). Next, partially tighten three Handrail Bolts with three Upright Star Washers (not shown) into the Left Upright (73). Then, firmly tighten all six Handrail Bolts. 6 73 90 64 64 90 74 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
8
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71).
See the inset draw-
ing. The connectors should slide together
easily and snap into place.
If they do not, turn
one connector and try again.
IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire
Harness (75).
71
Console
Assembly
4
75
Wire
Tie
74
5. Insert the brackets on the Handrails (99) into the
Right Upright (74) and the Left Upright (73).
Make sure that no wires are pinched.
73
5
74
99
6. Partially tighten three Handrail Bolts (64) with
three Upright Star Washers (90) into the Right
Upright (74). Next, partially tighten three
Handrail Bolts with three Upright Star Washers
(not shown) into the Left Upright (73).
Then,
firmly tighten all six Handrail Bolts.
73
74
64
64
90
90
75
71
6
73
99