NordicTrack C7 Zl Uk Manual - Page 8

5. Apply some of the included grease to an M6 x 70mm Barrel Nut (89). Orient the Handlebar (5) and the Upright (4) as shown. While a second person holds the Handlebar (5) near the Upright (4), insert the Extension Wire (59) upward through the Handlebar. Tip: Avoid pinching the Extension Wire (59). Attach the Handlebar (5) to the Upright (4) with the M6 x 70mm Barrel Nut (89), two M8 Washers (43), and an M6 x 16mm Screw (97). Then, insert an M6 x 60mm Barrel Nut (93) through the lower bracket on the Handlebar (5). Tighten an M6 x 16mm Screw (97) into the end of the Barrel Nut. 5 93 59 89 43 5 Grease 43 97 97 4 Avoid pinching the Extension Wire (59) 6. While another person holds the Console (13) near the Handlebar (5), connect the console 6 wires to the Extension Wire (59), the Pulse Wire (61), and the Receiver Wire (62). Insert the excess wire downward into the Handlebar (5) or upward into the Console (13). Tip: Avoid pinching the wires. Attach the Console (13) to the Handlebar (5) with four M4 x 16mm Screws (90). Console Wires 61 59 5 Avoid pinching the wires 13 62 90 90 8