NordicTrack Cx 1600 Elliptical English Manual - Page 18

How To Create And Use A Custom

Get NordicTrack Cx 1600 Elliptical PDF manuals and user guides View all NordicTrack Cx 1600 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

HOW TO CREATE AND USE A CUSTOM PROGRAM 1. Turn on the console. See step 1 on page 16. 2. Select a custom program. To select a custom program, press one of the three Custom buttons. When a Custom button is pressed, the indicator on the button will light. Note: If the custom program has not yet been defined, see step 3 to create the program. If the program is already defined, see step 4 to use the program. 3. Press the Start button or begin pedaling to start the program. Refer to the matrix. Each custom program is divided into Current Segment 40 one-minute seg- ments. One resis- tance setting and one pace setting can be programmed for each segment. The resis- tance setting for the first segment will be shown in the flashing Current Segment column of the matrix. (The pace settings are not shown in the matrix.) To program a resistance setting and a pace setting for the first segment, simply adjust the resistance of the pedals as desired by pressing the One-touch Resistance buttons and pedal at the desired pace. When the first segment of the program ends, a series of tones will sound and the current resistance setting and the current pace setting will be saved in memory. The columns of indicators will then move one column to the left, and the resistance setting for the second segment will be shown in the flashing Current Segment column. Program a resistance setting and a pace setting for the second segment as described above. Continue programming resistance and pace settings for as many segments as desired; custom programs can have up to 40 segments. 4. Press the Start button or begin pedaling to start the program. The custom program will function in almost the same way as a preset program (see steps 3 and 4 on page 19). If desired, you can redefine the program while using it. To change the resistance or pace setting for the current segment, simply press the One-touch Resistance buttons or change your pedaling pace. When the current segment ends, the new setting will be saved in memory. 5. Follow your progress with the displays. See step 5 on page 16. 6. Measure your heart rate if desired. See step 6 on page 17. 7. When you are finished exercising, the console will automatically turn off. See step 7 on page 17. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
18
HOW TO CREATE AND USE A CUSTOM
PROGRAM
1.
Turn on the console.
See step 1 on page 16.
2.
Select a custom program.
To select a custom
program, press one
of the three Custom
buttons. When a
Custom button is
pressed, the indica-
tor on the button will
light.
Note: If the custom program has not yet been
defined, see step 3 to create the program. If the
program is already defined, see step 4 to use
the program.
3.
Press the Start button or begin pedaling to
start the program.
Refer to the matrix.
Each custom pro-
gram is divided into
40 one-minute seg-
ments. One resis-
tance setting and
one pace setting
can be programmed for each segment. The resis-
tance setting for the first segment will be shown in
the flashing Current Segment column of the matrix.
(The pace settings are not shown in the matrix.) To
program a resistance setting and a pace setting for
the first segment, simply adjust the resistance of
the pedals as desired by pressing the One-touch
Resistance buttons and pedal at the desired pace.
When the first segment of the program ends, a se-
ries of tones will sound and the current resistance
setting and the current pace setting will be saved in
memory.
The columns of indicators will then move
one column to the left,
and the resistance setting
for the second segment will be shown in the flash-
ing Current Segment column. Program a resis-
tance setting and a pace setting for the second
segment as described above.
Continue programming resistance and pace set-
tings for as many segments as desired; custom
programs can have up to 40 segments.
4.
Press the Start button or begin pedaling to
start the program.
The custom program will function in almost the
same way as a preset program (see steps 3 and 4
on page 19).
If desired, you can redefine the program while
using it.
To change the resistance or pace set-
ting for the current segment,
simply press the
One-touch Resistance buttons or change your ped-
aling pace. When the current segment ends, the
new setting will be saved in memory.
5.
Follow your progress with the displays.
See step 5 on page 16.
6.
Measure your heart rate if desired.
See step 6 on page 17.
7.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 17.
Current Segment