NordicTrack E 12.2 Elliptical Uk Manual - Page 11
Slide an M8 Washer 97 and an Axle Spacer
View all NordicTrack E 12.2 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. Orient the Right Pedal Arm (58) assembly as shown. Apply grease to the axle on the Right Pedal Arm (58). Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 14mm Shoulder Screw (147), a Small Axle Cover (55), and an M8 Washer (97). Repeat this step for the Left Pedal Arm assembly (not shown). 11 147 55 59 97 58 Grease 12. Apply grease to a Pedal Arm Axle (64). 12 Next, slide an M8 Washer (97) and an Axle Spacer (77) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). While a second person holds the front end of the Right Pedal Arm (58) inside the bracket on the Right Upper Body Leg (60), insert the Pedal Arm Axle (64) into both parts. Slide an M8 Washer (97) and an Axle Spacer 99 (77) onto another M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). Then, tighten both Screws at the same time. Repeat this step on the other side of the elliptical. See assembly step 5. Tighten the M10 x 25mm Screws (99). 82 97 77 60 Grease 64 77 97 58 82 11