NordicTrack E 3100 Treadmill Uk Manual - Page 7

4. Cut the plastic tie holding the Upright Wire Harness (98) 4 in the right Upright (69). Have a second person hold the Handrails (66) near the Uprights (69) as shown. Connect the Upright Wire Harness (98) to the wires extending from the Console Base (81). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Insert the connectors and the Upright Wire Harness into the hole in the right Upright. Set the Handrails (66) on the Uprights (69); be careful 66 not to pinch the Upright Wire Harness (98). 81 98 69 5. Insert two Handrail Bolts (78) with Handrail Washers (77) into the right Upright (69) and the right Handrail (66). Be careful not to pinch the wires. Next, lift the right Handrail slightly and align the Handrail Bolts with the holes in the Handrail. Thread the Handrail Bolts into the Handrail; do not tighten the Bolts yet. Attach the left Handrail (not shown) in the same way. Tighten all four Handrail Bolts (78). 5 66 98 69 77 78 6. Make sure that all parts are properly tightened before you use the treadmill. Place a mat beneath the treadmill to protect the floor. For your benefit, familiarise yourself with the information on pages 28-30. 7