NordicTrack E4.1 Instruction Manual - Page 26
How To Adjust The Reed Switch
View all NordicTrack E4.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, you must remove the right disc cover and the right pedal disc. First, unplug the power adapter. Then, using a flat screwdriver, remove the right Disc Cover (18) (see the instructions below). Locate the Reed Switch (58). Loosen, but do not remove, the M4 x 16mm Screw (92). 27 81 18 Then, remove the M8 x 12mm Screws (81) from the right Pedal Disc (27), and gently rotate the right Pedal Disc out of the way. 92 58 24 41 Next, rotate the Pulley (24) until a Magnet (41) is aligned with the Reed Switch (58). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 16mm Screw (92). Plug in the power adapter and rotate the Pulley (24) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the right pedal disc and the right disc cover. 26