NordicTrack Elite 4.4 Bike English Manual - Page 11
Attach the Front and Rear Pivot Covers 12, 15
View all NordicTrack Elite 4.4 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
7. While a second person holds the Console (13) near the Pivot Bracket (71), plug the Upper Wire (87) and the two Pulse Wires (61) into the receptacles on the Console. IMPORTANT: The connectors on the Wires (61, 87) should slide easily into the receptacles and snap into place. If a connector does not slide easily, turn the connector and try again. If you do not insert the connectors properly, the Console (13) may become damaged when you use the exercise bike. Insert the excess wire into the Pivot Bracket (71). Tip: Avoid pinching the wires. Attach the Console (13) to the Pivot Bracket (71) with four M4 x 16mm Screws (72). 7 13 Avoid pinching the wires 87 61 72 72 71 72 8. Tip: Avoid pinching the wires. Press the Front Pivot Cover (12) and the Rear Pivot Cover (15) 8 together around the Pivot Bracket (71). Attach the Front and Rear Pivot Covers (12, 15) to the Pivot Bracket (71) with two M4 x 22mm Screws (84). 12 84 15 71 71 Avoid pinching the wires 11