NordicTrack Elliptical E7.1 English Manual - Page 9
Attach the Pedal Arm Sleeve 46 with an M8 x
View all NordicTrack Elliptical E7.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Apply grease to the axle on the right Crank Arm (39). 6 Orient a Pedal Arm Sleeve (46) so that the flat side is facing the elliptical. Slide the Pedal Arm Sleeve onto the axle on the right Crank Arm (39). Attach the Pedal Arm Sleeve (46) with an M8 x 25mm Patch Screw (121), a Large Axle Cover (113), and an M8 Washer (95). Tip: Avoid damaging the Large Axle Cover when tightening the Patch Screw. Repeat this step on the other side of the elliptical. 7. See drawing 7a. Locate the Pedal Arm Roller (32) on the Right Pedal Arm (12). 7a Set the Pedal Arm Roller (32) on the right side of the Ramp (130). See drawing 7b. Pull upward on the Latch (50) on the Right Pedal Arm (12). Press the Right Pedal Arm (12) onto the right Pedal Arm Sleeve (46). Make sure that the Right Pedal Arm latches into place. Repeat this step on the other side of the elliptical. 7b Grease 39 Flat Side 46 95 113 121 32 12 130 12 50 46 9