NordicTrack Gx 3.0 Instruction Manual - Page 5
Assembly
View all NordicTrack Gx 3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench , and a rubber mallet . , an adjustable As you assemble the exercise bike, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. M8 Locknut (72)-4 M8 Split Washer (75)-8 M8 Washer (43)-2 M4 x 5mm Screw (91)-1 M4 x 16mm Screw (90)-8 M8 x 20mm Patch Screw (74)-4 M10 x 95mm Patch Screw (76)-4 M6 x 70mm Bolt Set (50)-1 M6 x 60mm Bolt Set (51)-1 5