NordicTrack Rx 800 Instruction Manual - Page 7
the Upright Wire 84 to the Reed Switch Wire
View all NordicTrack Rx 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Slide the Seat (23) to the front of the Rail (2). Next, attach a Stop (32) to each side of the Rail (2) with an M4 x 19mm Screw (69). Then, attach the Rail Cap (38) to the Rail (2) with two M4 x 19mm Screws (69). 5 23 69 32 2 69 69 38 32 69 6. While a second person holds the Console (75) and the Upright (77) near the Frame (1), connect the Upright Wire (84) to the Reed Switch Wire (47). Insert the excess wire into the Frame. Tip: Avoid pinching the wires. Attach the Upright (77) to the Frame (1) with four M8 x 35mm Screws (82); start all the Screws, and then tighten them. 6 75 Avoid pinching the wires 82 84 47 77 1 7. Identify the Right and Left Upright Covers (80, 81), and orient them as shown. Press the Right and Left Upright Covers (80, 81) together around the Upright (77), and attach them to the Upright with two M4 x 19mm Screws (69). Then, insert the Knob (78) into the Right Upright Cover (80) and tighten it into the Upright (77). 7 81 69 77 80 78 69 7