NordicTrack Sl 728 Bike English Manual - Page 5
M8 x 50mm Button Screws 52 and four M8 Split
View all NordicTrack Sl 728 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. While another person lifts the rear of the Frame (1), 2 attach the Rear Stabilizer (16) to the Frame with four M8 x 50mm Button Screws (52) and four M8 Split Washers (55). 3. Turn the Adjustment Knob (7) into the Frame (1). 3 1 16 55 55 52 52 7 1 4. While another person holds the Upright (2) near the Frame (1), connect the Upper Wire Harness (42) to the Lower Wire Harness (43). Next, carefully pull the Upper Wire Harness up through the Upright while inserting the Upright into the Frame. Attach the Upright with an M10 x 63mm Bolt Set (62). Be careful to avoid pinching the Wire Harnesses (42, 43). Attach the Water Bottle Holder (74) to the Upright (2) with two M4 x 22mm Screws (60). 4 2 74 Make sure the Wire 42 62 Harnesses do not get 43 60 pinched and 1 damaged 62 during this step. 5. The Console (4) requires four "D" batteries (not includ- 5 ed); alkaline batteries are recommended. Remove the battery cover from the bottom of the Console. Next, insert four batteries into the battery compartment; make sure that the batteries are oriented as shown by the diagram inside the battery compartment. Reattach the battery cover. 4 Batteries Battery Cover 5