NordicTrack T 6.1 Treadmill English Manual - Page 12

. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 1 1/2" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Right and Left Handrails (84, 85) with four #10 x 1 1/2" Screws (9) and four #10 Star Washers (5). Start all four Screws, and then tighten them. 8 9 5 85 93 9 5 84 9. With the help of a second person, hold the console assembly near the Right Handrail (84) and the Left Handrail (not shown). Connect the ground wire from the console assembly to the Console Ground Wire (58) on the Pulse Crossbar (93). Next, connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 9 Console Assembly Console Wire 81 84 Wire Tie Ground Wire 58 93 Console Wire 81 12