NordicTrack T 7.2 Treadmill Uk Manual - Page 13

13. Raise the Frame (49) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (51) to the Base (80) with a 3/8" x 2 1/4" Bolt (61) and a 3/8" Nut (3). Attach the upper end of the Storage Latch (51) to the Frame (49) with a 3/8" x 2" Bolt (12) and a 3/8" Nut (3). Lower the Frame (49) (see HOW TO LOWER THE TREADMILL FOR USE on page 22). 13 49 3 12 51 Latch Knob Large Barrel 61 80 3 14. A ttach a Wheel (81) to the Base (80) with a 3/8" x 2 1/2" Bolt (2) and a 3/8" Nut (3). Do not over- 14 tighten the Nut; the Wheel must turn freely.  Attach the other Wheel (81) to the other side of the Base (80) in the same way.  Lower the Frame (not shown) (see HOW TO LOWER THE TREADMILL FOR USE on page 22). 2 3 80 81 3 2 81 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 24 and 25). 13