NordicTrack T15.0 Treadmill English Manual - Page 12

11. With the help of a second person, hold the console assembly near the Left Handrail (88). Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Connect the ground wire from the console assembly to the Console Ground Wire (105) and insert the wires into the hole in the console assembly. 11 Hole 105 Ground Wire Console Assembly Console Wire 81 Console Wire 81 Wire Tie 88 12. S et the console assembly on the Left and Right Handrails (88, 87). Be careful not to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly with eight #8 x 1/2" Screws (1) (only one side is shown). Start all eight Screws, and then tighten them. Attach two Console Clamps (106) to the console assembly with four #8 x 1" Screws (25).  See step 7. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/2" Bolts (4). 12 106 25 1 87 Console Assembly 106 25 1 1 88 12