NordicTrack T22.0 Treadmill English Manual - Page 12

Rear Leveling Foot Nuts 111 are threaded all

Get NordicTrack T22.0 Treadmill PDF manuals and user guides View all NordicTrack T22.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

11. A ttach the upper end of the Storage Latch (53) to the Frame (56) with a 3/8" x 1 3/4" Bolt (6) 11 and a 3/8" Nut (11). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame. 56 11 6 53 12. Remove the packaging material from the bottom of the Frame (56). 12  See the inset drawing. Make sure that the 1/2" Rear Leveling Foot Nuts (111) are threaded all the way onto the Rear Leveling Feet (60). Turn the two Rear Leveling Feet all the way into the Frame (56). L ower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 27). If one of the Rear Leveling Feet (60) does not sit flat on the floor, turn the Rear Leveling Foot until it sits flat on the floor, and then tighten the 1/2" Rear Leveling Foot Nut (111) against the Frame (56). 56 56 60 60 111 60 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 29 and 30). 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
12
12.
Remove the packaging material from the bottom
of the Frame (56).
See the inset drawing.
Make sure that the 1/2"
Rear Leveling Foot Nuts (111) are threaded all
the way onto the Rear Leveling Feet (60). Turn
the two Rear Leveling Feet all the way into the
Frame (56).
Lower the Frame (
56
) (see HOW TO LOWER
THE TREADMILL FOR USE on page 27).
If one of the Rear Leveling Feet (60) does not sit
flat on the floor, turn the Rear Leveling Foot until
it sits flat on the floor, and then tighten the 1/2"
Rear Leveling Foot Nut (111) against the Frame
(56).
12
56
56
60
60
60
111
11. Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (11). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
11
53
11
56
6
13.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plas-
tic on the treadmill decals, remove the plastic.
To protect the floor or carpet, place a mat under the treadmill.
N
ote: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 29 and 30).