NordicTrack T9.1 Instruction Manual - Page 13
Attach the Left Upright Cover 80 to the Left
View all NordicTrack T9.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
14. Set the console assembly on the Left and Right Handrails (82, 83). Be careful not to pinch any wires. Insert the excess Upright Wire (87) into the Right Handrail. Attach the console assembly to the Crossbar (107) with six #8 x 3/4" Screws (1). Start all six Screws, and then tighten each of them. Attach the two Console Clamps (105) to the console assembly with four #8 x 1" Screws (53). 14 87 Console Assembly 105 53 107 83 1 1 1 82 1 15. Hold the Right Upright Cover (86) against the console assembly. Align the holes in the Right Upright Cover with the holes in the Right Upright (85). Attach the Right Upright Cover with two #8 x 3/4" Screws (1). Attach the Left Upright Cover (80) to the Left Upright (84) in the same way. See steps 5 and 7. Tighten the 3/8" x 4" Patch Bolts (7) and the 3/8" x 1 1/2" Patch Bolts (3). 15 86 1 85 80 Console 1 Assembly 84 13