Oki B420dn B410, B420, B430 Series Safety, Warranty, Regulatory Information (E - Page 9

Reactivity Data Stability: Stable. Conditions to Avoid:Avoid excess heat (over 200°C [392°F]) and all sources of ignition Polymerization: Will not occur. Hazardous Decomposition or Byproducts: Combustion products include harmful gases such as carbon monoxide and nitrogen. Incompatibility: Avoid exposure to strong oxidizers or reducing agents. Preventive Measures Personal Protective Equipment Respiratory Protection: Not normally required. For large spills, use dust respirator during cleanup. Protective Gloves and/or Eye Protection: Not normally required. For large spills, use rubber gloves and safety goggles during cleanup. Engineering Controls Ventilation: Local exhaust recommended, mechanical (general) recommended. Other Protective Equipment and/or Hygienic Practices: None. Spill Cleanup Small Spills 1. Remove sources of ignition. 2. Carefully clean up the spill with a wet cloth, avoiding inhalation of fine dust. Large Spills 1. Remove sources of ignition and keep unnecessary and unprotected personnel away from area. 2. Wear protective gear: respirator, rubber gloves, safety goggles. 3. Vacuum the spill: vacuum motor must be rated as dust explosion-proof. Then wipe up remainder with a wet cloth. Waste Disposal • Prevent release of material into natural waters and sewers. • Follow appropriate federal, state and local regulations. • Small amounts can be incinerated. Careful! Combustion can create harmful gases such as carbon monoxide and nitrogen oxides. • Large amounts must be passed to a licensed waste contractor. Precautions Precautions for Handling or Storage: Keep out of reach of children. Protect from the sun. Store in a cool room, under 104°F (40°C). Use with adequate ventilation. Keep away from sparks and open flame. Keep away from oxidizing materials. Other Precautions: None. Shipping Information Special Shipping Information: This product is not regulated as hazardous materials by the DOT (United States Department of Transportation). User's Responsibility This bulletin cannot cover all possible situations which the user may experience when using this product. Each aspect of your operation must be examined in regard to if, or where, additional precautions may be necessary. All health and safety information contained in this bulletin must be provided to your employees or customers. It is your responsibility to use this information to develop appropriate work practice guidelines and employee instructional programs for your operation. Preparation Date of MSDS ___________ Date: Octoner 1, 2008. Prepared by: Oki Data Americas, Inc Engineering Services Department. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (856) 235-2600 Fax: (856) 222-5320 http://www.okiprintingsolutions.com my.okidata.com 9 - English